Stamped concrete

 

stamped concrete

Stamped concrete is a home remodeling trend that seems to be growing quickly and for good reason. In the past only expensive commercial applications looked decent, and sometimes that was a stretch. Recently though new trends in texturizing and pigmenting allow homeowners to introduce it to their exteriors. Stamped concrete involves pouring slab concrete for driveways, walkways, patios, etc. Then patterns are pressed into the wet concrete to create a textured finish. The patterns are made using large flexible polyurethane stamps. The stamps are about a 2×2 feet square and an inch or two thick. This newer type of stamped concrete imparts textures that can duplicate many different surfaces such as cobblestones, brick, pavers, wood, seashells, and more. Pigment is also usually added to stamped concrete to further duplicate the look of these patterns. Brick, pavers, and cobbles do look great but since they form a surface of many interlocking pieces they can be susceptible to changes in the underlying surface.  Also bricks, pavers, cobbles, etc. allow for weed growth through the cracks. Since stamped concrete is a solid, continuous surface nothing can grow up through as it as the “cracks” in stamped concrete are just impressions in the concrete that only partially go through the surface. A stamped concrete patio will also give you the look and texture of a stone patio for a lot less than the real thing. Up to 50% less! That’s not all a stamped concrete patio is low maintenance as it won’t settle over time creating uneven surfaces. You can also add a stamped finish to an existing concrete slab as long as your old slab is in stable and good condition. You will be raising the height of your old slab by an inch or so, so you will want to make sure the higher level doesn’t interfere with existing steps or vents in your foundation walls. Like anything there are just a few drawbacks to stamped concrete:

– Deep depressions.

Although stamped concrete is a good choice for ADA accessibility, be cautious of deeply embossed patterns. All the texture may be tempting, but it creates uneven surfaces that can make patio furniture wobble and may be hazardous for those with limited mobility. Accessibility guidelines require bumps and ridges on walking surfaces to be no more than 1/4 inch in hight.

– Color.

Although you will have more color options with surface colorants they can flake off over time. A better option is to have your concrete dyed while it’s being mixed for a more permanent solution.

Feel free to contact us with any questions you may have regarding installing stamped concrete.

C&H Construction is a licensed general contractor and Custom Home builder located in Blairsville, Union County Georgia serving Towns County Georgia, Fannin County Georgia, Gilmer County Georgia and the North Georgia Mountains.